What Is The Price Of The Silicon Manganese Water Slag Grinding Mill Produced By HCM?

The environmental problems caused by ore collection have been paid close attention by the government. The price of silicon manganese alloy has gone up rapidly, and many enterprises have invested in this industry. How to deal with the remaining silicon manganese slag after it is used to extract silicon manganese alloy? What are the uses of manganese slag?

Composition of silicon manganese slag

The silicomanganese slag of extracting silicomanganese alloy is divided into dry slag, mostly massive, and water slag, mostly fine granular. Its structure is loose, the appearance is often light green particles, and it is composed of some irregular porous amorphous particles. It is mainly composed of CaSiO3, caal2o4, ca2al2sio7, ca2mgsi2o7 and MgSiO3.

Application of silicon manganese slag

Silicon manganese slag can be used in mineral wool, glass ceramics, cement, concrete admixture, permeable brick and other materials.

1、Production of cement. Under the action of activator, the silicomanganese slag can react with water and produce cementitious property. It can be used as raw material and cement mixture to produce ordinary portland cement.

2、Concrete admixture. The mechanical properties of the concrete are better than that of the reference concrete, and the impermeability, frost resistance and dry shrinkage properties of the concrete are better than those of the reference concrete.

3、Processing ecological permeable brick, cement, sand, slag, fly ash and other environmental protection materials, high pressure forming. The effect of using silicon manganese slag to make ecological permeable brick is good.

4、Manufacturing manganese fertilizer, silicon fertilizer. It has the advantages of simple process, reliable technical route, less investment and quick effect to make manganese fertilizer from silicon manganese water slag.

5、Recovery process. The specific gravity difference between silicomanganese water slag and silicomanganese alloy is large, so the pure alloy and waste slag can be obtained. Finally, the concentrate and tailings can be dehydrated and recovered respectively through dewatering screen.

6、Preparation of glass ceramics with silicon manganese slag and carbon chromium slag. Glass ceramics is a new type of building materials, which has the duality of glass and ceramics. It is a new type of building materials developed by integrating glass and stone. It can promote the formation and melting of glass and can be used in the manufacture of glass ceramics.

What are the processing equipment of silicon manganese slag?

The HLM series vertical roller mill machine of HCM professional silicon manganese slag processing equipment has the following advantages:

（1）HCM production of professional silicon manganese slag processing vertical mill, grinding powder high efficiency, excellent energy saving. It can save 30% - 50% energy than ordinary mill, which is more effective.

（2）HCM production of professional silicon manganese slag processing vertical mill. It adopts the principle of material bed grinding, the material stays in the mill for a short time, and the product quality is stable and excellent.

（3）The roller can be turned out of the mill by hydraulic device. It is very convenient to replace the lining plate of roller sleeve and overhaul the mill.

（4）It adopts the limiting device of grinding roller to avoid the violent vibration caused by material breaking during the working time of the mill, and has high reliability.

（5）The system has small vibration and low noise; The system is sealed as a whole, operates under full negative pressure, and has no dust spillover, which can basically realize dust-free workshop;

（6）It integrates crushing, drying, grinding and conveying, with simple technological process, less system equipment, compact structure and small floor area.

（7）It uses PLC automatic control system, and can realize remote control, high degree of automation.

HCM has 30 years of experience in R & D, production, sales and maintenance. Our quality and credit have been tested by the market and customers, and have been widely recognized by customers. To provide customers with one-to-one intimate service, customized products, after-sales regular follow-up visits, etc., high return on investment.

If you are in need of any non-metallic grinding mill, contact mkt@hcmilling.com or call at +86-773-3568321, HCM will tailor for you the most suitable grinding mill program based on your needs, more details please check www.hcmilling.com.