Characteristics of graphite milling equipment and mill selection

Graphite products are recognized as strategic resources, the use of graphite products has become a focus of attention after rare earth so as the graphite grinding machine, graphite products have following features. 2

1, High temperature resistant: graphite products are currently known as one of the most high-temperature resistant materials. Its melting point is 3850 ℃ ± 50 ℃, the boiling point of 4250 ℃. It is in the 7000 ℃ ultra-high temperature arc 10S with minimum loss of 0.8% by weight. It can be seen that the high temperature resistant performance of graphite is very prominent.

2, Thermal and electrical conductivity: graphite has good thermal and electrical conductivity; 4 times higher than stainless steel, 2 times higher than carbon steel and 100 times higher than average non-metallic materials.

3, Special thermal shock resistance: when the temperature suddenly changes, the thermal expansion coefficient is small, and therefore has good thermal stability, rapid changes of temperature while no cracks.

4, Chemical stability: graphite has good chemical stability at room temperature, can resistant to acid, alkali, organic solvent corrosion.

5. Lubricity: The lubricating property of graphite is similar to MoS2, the friction coefficient is less than 0.1, and its lubricating property varies with the size of the scale, the bigger the scale is, the smaller the coefficient of friction is, the better the lubrication is.

Graphite powder production and processing equipment enables manufacturers of graphite powder has a greater advantage.

Guilin Hong Cheng ultra-fine graphite grinding machine: HCH series ultrafine mill

[Feeder size]: ≤10mm

[Mill weight]: 17.5-70t

[Total power]: 144-680KW

[Production capacity]: 1-22t/h

[Finished particle size]: 0.04-0.005 mm

[Scope]: Widely used in electric power, metallurgy, cement, chemicals, building materials, coatings, paper, rubber, medicine, food and other production and living areas.

[Applicable materials]: For the Mohs hardness below 7, the humidity of 6% within the various non-metallic mineral materials with high productivity and efficient grinding capacity, such as graphite, talc, calcite, calcium carbonate, dolomite, potassium feldspar , Bentonite, kaolin, carbon, fluorite, brucite and other grinding effect.

[Features]: The mill is ultrafine powder processing energy saving equipment, small footprint, complete sets of strong, versatile, simple operation, easy maintenance, and stable performance, cost-effective, economical and practical ultra-fine powder processing equipment.