Application of Petroleum Coke Milling Equipment in Glass Industry

Petroleum coke mill powder is been used in the glass industry, fineness requirements of 200mesh D90. Guilin Hong Cheng provides energy efficient petroleum coke mill-HC series pendulum mill, machine power 85-362kw, finished particle size 22-180μm, output 1-25t/h.

First, the main application areas of China's petroleum coke

China's petroleum coke is mainly used in electrolytic aluminum industry, accounting for more than 65% of the total, followed by carbon, industrial silicon and other smelting industries, the use of petroleum coke as the fuel is mainly in cement, power generation, glass, etc. industry, the proportion is much less. At present, the supply and demand situation of petroleum coke in China is basically the same, but due to the export of low-sulfur high-end petroleum coke, the supply of domestic petroleum coke is insufficient, and still need to be supplemented by imported high-sulfur petroleum coke. With the construction of a large number of coking plants in recent years, the domestic petroleum coke production will be further expanded.

Glass industry is a high energy consumption industry, the cost of glass in the cost of fuel account for about 35% to 50%, glass melting furnace kiln is the most energy-consuming equipment.

Once the glass melting furnace started, you cannot turn off the fire until the furnace overhaul (3-5 years), it requires continuous fuel adding to ensure the over thousands of kiln furnace temperature, the general milling workshop will have a spare mill to ensure continued produce.

Petroleum coke powder used in the glass industry, fineness requirements of 200mesh D90. The original coke water content is generally 8% -15%, drying treatment is needed before sent into the mill.

Second, petroleum coke milling equipment selection

Guilin Hong Cheng efficient energy-saving petroleum coke mills: HC series pendulum mill

{Grinding ring diameter}: 1000-1700mm

{Maximum feeder size}: ≤25-30mm

{Machine power}: 85-362kw

{Finished particle size}: 22-180μm

{Capacity}: 1-25t/h

{Scope of application}: Suitable for limestone, calcite, activated carbon, talc, dolomite, titanium dioxide, quartz, bauxite, marble, feldspar, barite, fluorite and other Mohs hardness below 7, humidity 6% of the various non-flammable and explosive materials.

{Technology advantages}: The milling machine is suitable for large-scale milling project, with reliable performance, high efficiency and energy saving, environmental protection, easy maintenance, large handling capacity, high dust collection efficiency advantages.